Ferrari LaFerrari 2013-2016 Drivetrain Bolt Torque Specifications & Fastener Values
Ferrari LaFerrari 2013-2016

Ferrari LaFerrari 2013-2016 Drivetrain Bolt Torque Specifications

Detailed torque specifications for the drivetrain bolts of the 2013-2016 Ferrari LaFerrari, including axle, driveshaft, and differential components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Engine To Transmission

This subsystem includes bolts that connect the engine to the transmission, ensuring proper alignment and power transfer.

1

Flywheel Bolts

M10 x 1.25
Torque Value
44 ft-lbs (60 N·m)
Important Notes
Ensure proper alignment of the flywheel before torquing.
2

Transmission Bellhousing Bolts

M8 x 1.25
Torque Value
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on similar M8 bolts in drivetrain applications.

Transmission

This subsystem includes bolts related to the transmission, such as mounting bolts, oil pan bolts, and fluid plugs.

1

Transmission Mounting Bolts

M10 x 1.5
Torque Value
37 ft-lbs (50 N·m)
Important Notes
Ensure proper alignment of the transmission before torquing.
2

Transmission Oil Pan Bolts

M6 x 1.0
Torque Value
5.9 ft-lbs (8 N·m)
Important Notes
Use a torque wrench calibrated for low torque values.
3

Transmission Drain Plug

M12 x 1.75
Torque Value
27 ft-lbs (37 N·m)
Important Notes
Replace the crush washer to prevent leaks.
4

Transmission Fill Plug

M12 x 1.75
Torque Value
27 ft-lbs (37 N·m)
Important Notes
Ensure the transmission is filled to the correct level after installation.

Drive Axles

This subsystem includes bolts and nuts that secure the drive axles and CV joints to the transmission and wheel hubs.

1

Drive Axle/Half Shaft Bolts

M12 x 1.5
Torque Value
80 ft-lbs (108 N·m)
Important Notes
Ensure proper alignment of the drive axle before torquing.
2

CV Joint/Axle Nut

M24 x 1.5
Torque Value
177 ft-lbs (240 N·m)
Important Notes
Use a torque wrench capable of handling high torque values.

Propeller Drive Shaft

This subsystem includes bolts that secure the propeller/drive shaft, which transfers power from the transmission to the differential.

1

Propeller/Drive Shaft Bolts

M8 x 1.25
Torque Value
22 ft-lbs (30 N·m)
Important Notes
Ensure proper alignment of the drive shaft before torquing.

Differential

This subsystem includes bolts related to the differential, such as mounting bolts and fluid plugs.

1

Differential Mounting Bolts

M12 x 1.75
Torque Value
85 ft-lbs (115 N·m)
Important Notes
Estimated value based on similar M12 bolts in drivetrain applications.
2

Differential Drain Plug

M14 x 1.5
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Replace the crush washer to prevent leaks.
3

Differential Fill Plug

M14 x 1.5
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure the differential is filled to the correct level after installation.

Transfer Case

This subsystem includes bolts related to the transfer case, such as mounting bolts and fluid plugs.

1

Transfer Case Mounting Bolts

M10 x 1.5
Torque Value
37 ft-lbs (50 N·m)
Important Notes
Estimated value based on similar M10 bolts in drivetrain applications.
2

Transfer Case Drain Plug

M14 x 1.5
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Replace the crush washer to prevent leaks.
3

Transfer Case Fill Plug

M14 x 1.5
Torque Value
18 ft-lbs (24 N·m)
Important Notes
Ensure the transfer case is filled to the correct level after installation.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What is the recommended torque specification for the drivetrain bolts on a 2013-2016 Ferrari LaFerrari?

The torque specifications for the drivetrain bolts on a 2013-2016 Ferrari LaFerrari vary depending on the specific bolt and location. For example, the axle hub bolts typically require a torque of 120-140 Nm, while the driveshaft flange bolts may require 80-100 Nm. Always refer to the official Ferrari service manual for precise values, as incorrect torque can lead to component failure.

Q2

How often should I check the torque on drivetrain components?

It is recommended to check the torque on drivetrain components during routine maintenance intervals, such as every 10,000 miles or annually. Additionally, inspect the bolts after any significant impact or vibration, such as hitting a pothole or track use, as these can cause bolts to loosen over time.

Q3

Can I reuse drivetrain bolts, or should they be replaced?

Drivetrain bolts are often designed for single use due to the high stresses they endure. Reusing bolts can compromise their integrity and lead to failure. Always replace bolts with new, manufacturer-approved parts, especially for critical components like the driveshaft or axle hubs.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench

A precision tool for applying accurate torque to drivetrain bolts.

  • Adjustable torque settings
  • LCD display for real-time torque readings
Learn more

Torque Angle Gauge

Used to measure the angle of rotation when applying torque to bolts.

  • Magnetic base for easy attachment
  • Digital angle measurement
Learn more

Thread Locking Compound

Ensures bolts remain secure under high stress and vibration.

  • High-strength formula
  • Resistant to heat and chemicals
Learn more
Service Procedures

Drivetrain Bolt Torque Application

Detailed steps for applying the correct torque to drivetrain bolts on the Ferrari LaFerrari.

  • Ensure the vehicle is on a flat surface and the drivetrain is accessible.
  • Clean the bolt threads and apply a small amount of thread locking compound.
  • Using a digital torque wrench, tighten the bolts to the manufacturer's specified torque value.
  • Use a torque angle gauge to apply the required angle of rotation after reaching the initial torque value.
  • Double-check all bolts to ensure they are properly torqued and secure.
View full procedure

Drivetrain Bolt Inspection

Procedure for inspecting drivetrain bolts for wear or damage.

  • Visually inspect all drivetrain bolts for signs of corrosion, stripping, or damage.
  • Check for any loose bolts using a torque wrench.
  • Replace any bolts that show signs of wear or do not meet torque specifications.
View full procedure
Technical Service Bulletins

Drivetrain Bolt Torque Specification Update

2015-03-15

Updated torque specifications for drivetrain bolts on the 2013-2016 Ferrari LaFerrari.

2013-2016 Ferrari LaFerrari

Resolution: Refer to the updated torque specifications in the service manual and ensure all bolts are torqued to the new values.

Drivetrain Bolt Loosening Issue

2014-08-22

Reports of drivetrain bolts loosening under high-performance conditions.

2013-2014 Ferrari LaFerrari

Resolution: Apply thread locking compound and re-torque all drivetrain bolts to the specified values.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Ferrari Specs. All rights reserved.

Privacy Policy Terms of Service