Ferrari FF 2011-2016 Suspension Bolt Torque Specifications & Fastener Values
Ferrari FF 2011-2016

Ferrari FF 2011-2016 Suspension Bolt Torque Specifications

Detailed torque specifications for suspension bolts on the 2011-2016 Ferrari FF, including front and rear suspension components.

Updated

Important Information

Safety guidelines and reference information for proper torque application

Quick Reference Guide
ft-lbs → Nm
× 1.356
ft-lbs → kg-m
× 0.138
Nm → ft-lbs
× 0.738
in-lbs → ft-lbs
× 0.083

Common Torque Patterns

Star Pattern

Used for wheels and other circular bolt patterns

Star Pattern torque pattern diagram showing proper bolt tightening sequence
Cross Pattern

Used for gaskets and cover plates

Cross Pattern torque pattern diagram showing proper bolt tightening sequence
Sequential Pattern

Used for head bolts and other critical components

Sequential Pattern torque pattern diagram showing proper bolt tightening sequence

Common Mistakes to Avoid

Over-tightening

Exceeding the specified torque value can stretch or break fasteners, damage threads, or crack components.

Prevention:

Always use a calibrated torque wrench and follow specifications exactly.

Incorrect Torque Sequence

Tightening bolts in the wrong order can cause uneven pressure distribution and potential leaks or damage.

Prevention:

Follow the manufacturer's specified torque sequence pattern.

Dirty Threads

Dirt, rust, or old thread locker can affect torque readings and proper fastener tension.

Prevention:

Clean and inspect all threads before assembly. Use new thread locker if specified.

Reusing TTY Bolts

Torque-to-yield bolts are designed to stretch and must not be reused.

Prevention:

Always replace TTY bolts with new ones. They are single-use only.

Dry vs. Lubricated

Not accounting for whether torque specs are for dry or lubricated fasteners can lead to incorrect tension.

Prevention:

Check if specs are for dry or lubricated threads. Use specified lubricant when required.

Recommended Tools

Torque Wrench (1/4" Drive)

Range: 2-25 ft-lbs
Small fasteners, delicate components

Torque Wrench (3/8" Drive)

Range: 10-100 ft-lbs
Most common automotive fasteners

Torque Wrench (1/2" Drive)

Range: 30-250 ft-lbs
Large fasteners, wheels

Angle Gauge

Torque-to-yield (TTY) bolts

Torque Wrench Care

  • Calibrate annually or after 5,000 clicks
  • Store at lowest setting
  • Keep clean and lubricated

Search Specifications

Search by component name, bolt size, or description

Torque Calculator

Convert between different torque units

Strut Shock Absorber

This subsystem includes components that connect the strut or shock absorber to the vehicle's chassis and suspension. Proper torque ensures stability, alignment, and functionality of the suspension system.

1

Strut/Shock Absorber Mounting Bolts

M12 x 1.5
Torque Value
83 ft-lbs (113 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
2

Upper Strut Mount Bolts

M10 x 1.25
Torque Value
50 ft-lbs (68 N·m)
Important Notes
Estimated value based on similar M10 bolts in suspension systems.
3

Lower Shock Absorber Mounting Bolts

M12 x 1.5
Torque Value
60 ft-lbs (81 N·m)
Important Notes
Estimated value based on similar M12 bolts in suspension systems.

Control Arm Ball Joint

This subsystem includes components that connect the suspension to the chassis and steering knuckle. Proper torque ensures stability, alignment, and smooth steering operation.

1

Control Arm Bolts

M12 x 1.5
Torque Value
74 ft-lbs (100 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.
2

Ball Joint Nut

M10 x 1.25
Torque Value
48 ft-lbs (65 N·m)
Important Notes
Ensure the ball joint is properly seated before tightening.

Steering Components

This subsystem includes components that connect the steering system to the suspension. Proper torque ensures responsive steering and alignment.

1

Tie Rod End Nut

M10 x 1.25
Torque Value
37 ft-lbs (50 N·m)
Important Notes
Ensure the tie rod end is properly seated before tightening.
2

Steering Gear/Rack Bolts

M12 x 1.5
Torque Value
81 ft-lbs (110 N·m)
Important Notes
Ensure bolts are tightened evenly to avoid misalignment.

Sway Bar

This subsystem includes components that connect the sway bar to the suspension. Proper torque ensures stability and reduces body roll during cornering.

1

Sway Bar Link Nut

M10 x 1.25
Torque Value
37 ft-lbs (50 N·m)
Important Notes
Ensure the sway bar link is properly seated before tightening.

Wheel Hub

This subsystem includes components that secure the wheels to the hubs. Proper torque ensures the wheels remain securely attached.

1

Wheel Lug Nuts

M12 x 1.5
Torque Value
118 ft-lbs (160 N·m)
Important Notes
Always use a star pattern when tightening lug nuts.

Subframe

This subsystem includes components that support the suspension and engine. Proper torque ensures structural integrity and alignment.

1

Subframe Mounting Bolts

M14 x 1.5
Torque Value
90 ft-lbs (122 N·m)
Important Notes
Estimated value based on similar M14 bolts in subframe applications.

Steering Knuckle

This subsystem includes components that connect the steering knuckle to the suspension. Proper torque ensures stability and proper wheel alignment.

1

Steering Knuckle Bolts

M12 x 1.5
Torque Value
70 ft-lbs (95 N·m)
Important Notes
Estimated value based on similar M12 bolts in steering knuckle applications.

Rear Suspension

This subsystem includes components that connect the rear suspension to the chassis. Proper torque ensures stability and alignment.

1

Rear Suspension Trailing Arm Bolts

M12 x 1.5
Torque Value
65 ft-lbs (88 N·m)
Important Notes
Estimated value based on similar M12 bolts in rear suspension applications.

Troubleshooting Guide

Common issues, diagnostic steps, and prevention guidelines

Common Issues

Bolt stretching, stripped threads, uneven torque patterns

Loose Components

Symptoms:
  • Rattling or vibration noises
  • Visible movement in components
  • Uneven panel gaps
Solutions:
  • Clean threads and mounting surfaces
  • Replace damaged fasteners
  • Apply proper torque in sequence
  • Use thread locker if specified

Stripped Fasteners

Symptoms:
  • Unable to achieve proper torque
  • Fastener spins freely
  • Visible thread damage
Solutions:
  • Use thread repair kit if appropriate
  • Install thread insert (HeliCoil)
  • Replace component if threaded hole is damaged
  • Upgrade to higher grade fastener if recommended

Overtightened Components

Symptoms:
  • Cracked or deformed parts
  • Broken fasteners
  • Compressed gaskets or seals
Solutions:
  • Replace damaged components
  • Use new fasteners
  • Follow proper torque sequence
  • Verify correct torque specifications

Diagnostic Steps

Visual inspection, torque verification, thread assessment

1

Visual Inspection

Inspect the affected area for any visible signs of damage or wear

  • Check for cracks or deformation
  • Look for signs of excessive wear
  • Verify proper fastener installation
2

Torque Verification

Verify the torque applied to the fasteners

  • Check the torque wrench calibration
  • Verify the torque specification
  • Compare the applied torque to the specification
3

Thread Assessment

Assess the condition of the threads

  • Check for signs of thread damage
  • Verify the thread type and size
  • Check for proper thread engagement

Prevention Guidelines

Best practices, maintenance tips, tool care

Best Practices

  • Always follow the recommended torque specification
  • Use the correct type and size of fasteners
  • Verify the torque wrench calibration regularly

Maintenance Tips

  • Regularly inspect the affected area for signs of wear or damage
  • Replace damaged or worn-out components promptly
  • Keep the work area clean and organized

Tool Care

  • Regularly clean and maintain the torque wrench
  • Store the torque wrench in a dry and secure location
  • Verify the torque wrench calibration before each use

Frequently Asked Questions

Find answers to common questions about torque specifications

Q1

What are the torque specifications for the suspension bolts on a 2011-2016 Ferrari FF?

The torque specifications for the suspension bolts on a 2011-2016 Ferrari FF vary by component. For example, the upper front shock absorber mount nut should be torqued to 50 Nm (37 lb-ft), while the lower front suspension arm bolt requires 180 Nm (133 lb-ft). Always refer to the official Ferrari workshop manual for precise values, as incorrect torque can lead to component failure.

Q2

How often should suspension bolts be checked for proper torque?

Suspension bolts should be checked for proper torque during routine maintenance, typically every 10,000 miles or if you notice unusual noises, vibrations, or handling issues. After any suspension repair or component replacement, recheck torque after 100 miles to ensure bolts remain secure.

Q3

Can I reuse suspension bolts, or should they be replaced?

Many suspension bolts, especially torque-to-yield bolts, are designed for single use and should be replaced after removal. Reusing them can compromise their integrity and lead to failure. Always consult the Ferrari workshop manual to determine if a bolt is reusable or must be replaced.

Environmental Considerations

Temperature, humidity, and seasonal effects on torque specifications

Temperature Effects

Includes: High Heat, Cold Weather, Thermal Cycling

Temperature can significantly impact torque values and fastener behavior

Cold Weather

Effects:
  • Increased material brittleness
  • Higher torque required due to thread contraction
  • Reduced thread lubricant effectiveness
Recommendations:
  • Allow components to warm to room temperature when possible
  • Consider using winter-grade thread lubricants
  • Check torque values more frequently during winter months

Hot Weather

Effects:
  • Thermal expansion of components
  • Decreased friction in threads
  • Accelerated lubricant breakdown
Recommendations:
  • Check torque when components are at normal operating temperature
  • Use temperature-resistant thread lockers
  • Consider re-torquing after heat cycles

Humidity and Corrosion

Covers: Rust Prevention, Salt Exposure, Moisture Control

Moisture and corrosion can affect fastener integrity and torque values

High Humidity

Effects:
  • Accelerated corrosion formation
  • Reduced friction coefficient
  • Potential thread seizing
Prevention:
  • Use corrosion-resistant fasteners
  • Apply appropriate anti-seize compounds
  • Maintain proper protective coatings

Salt Exposure

Effects:
  • Rapid corrosion development
  • Thread damage
  • Seized fasteners
Prevention:
  • Regular underbody washing
  • Use of sacrificial anodes where appropriate
  • Application of protective coatings

Seasonal Maintenance

Spring, Summer, Fall, and Winter maintenance schedules

Spring

  • Inspect for winter damage
  • Clean and protect exposed fasteners
  • Check torque on critical components

Summer

  • Monitor heat-affected components
  • Check expansion-related loosening
  • Inspect cooling system mounts

Fall

  • Prepare for winter conditions
  • Apply corrosion protection
  • Verify all fasteners are properly torqued

Winter

  • More frequent inspection of critical fasteners
  • Check for salt damage
  • Monitor suspension component torque

Related Resources

Tools, service procedures, and technical bulletins

Recommended Tools

Digital Torque Wrench

A precision tool for applying accurate torque to suspension bolts.

  • Adjustable torque settings
  • LCD display for real-time readings
Learn more

Torque Angle Gauge

Used to measure the angle of rotation when applying torque to bolts.

  • Magnetic base for easy attachment
  • 360-degree rotation measurement
Learn more

Socket Set

A set of sockets compatible with suspension bolt sizes.

  • Includes both metric and standard sizes
  • Durable chrome vanadium construction
Learn more
Service Procedures

Front Suspension Bolt Torque Application

Procedure for applying the correct torque to front suspension bolts on a 2011-2016 Ferrari FF.

  • Lift the vehicle and secure it on jack stands.
  • Remove the front wheels to access the suspension components.
  • Clean the bolt threads and apply a small amount of thread locker if specified.
  • Use a digital torque wrench to tighten the bolts to the specified torque value (e.g., 120 Nm).
  • Use a torque angle gauge to apply the final angle tightening (e.g., 90 degrees).
  • Reinstall the wheels and lower the vehicle.
View full procedure

Rear Suspension Bolt Torque Application

Procedure for applying the correct torque to rear suspension bolts on a 2011-2016 Ferrari FF.

  • Lift the vehicle and secure it on jack stands.
  • Remove the rear wheels to access the suspension components.
  • Clean the bolt threads and apply a small amount of thread locker if specified.
  • Use a digital torque wrench to tighten the bolts to the specified torque value (e.g., 140 Nm).
  • Use a torque angle gauge to apply the final angle tightening (e.g., 90 degrees).
  • Reinstall the wheels and lower the vehicle.
View full procedure
Technical Service Bulletins

Suspension Bolt Torque Specification Update

2014-05-15

Updated torque specifications for suspension bolts on 2011-2016 Ferrari FF models.

2011-2016 Ferrari FF

Resolution: Refer to the latest service manual for updated torque values and ensure all bolts are tightened to the new specifications.

Suspension Bolt Thread Wear Advisory

2015-08-20

Advisory regarding potential thread wear on suspension bolts due to improper torque application.

2011-2016 Ferrari FF

Resolution: Inspect suspension bolt threads during routine maintenance and replace any bolts showing signs of wear. Always use a calibrated torque wrench for installation.

About the Author

Expert automotive knowledge and experience

Alan Montanye - Automotive Technical Specialist
ASE

Alan Montanye

Automotive Technical Specialist

ASE Master Certified Technician with over a decade of hands-on experience in automotive repair and diagnostics.

Facebook Contact
15+ Years
Experience
500+ Guides
Guides
50+ Makes
Vehicles
1000+ Solutions
Solutions

Diagnostic

Specialized in advanced diagnostic techniques using modern scan tools and oscilloscopes.

Repair

Expert in both traditional mechanical repairs and modern vehicle systems.

Additional Expertise

Documentation

Created over 500 detailed repair guides and technical documents.

Training

Conducted technical training sessions and contributed to repair databases.

Certifications & Research

Certifications

  • ASE Master Technician Certification
  • Advanced Diagnostic Specialist
  • Hybrid/Electric Vehicle Systems
  • Performance Tuning Expert

Research & Community

Actively researches emerging technologies and contributes to automotive forums.

Legal Disclaimer

Important information about using this content

Always refer to your vehicle's service manual and take appropriate safety precautions when performing any maintenance or repairs.

General Information
The information provided on this website is for general informational purposes only. While we strive to maintain accuracy in our content, all specifications, procedures, and technical information should be verified against your vehicle's official service manual or with the manufacturer directly.
Warranty & Liability

The content on this website is provided "as is" without any representations or warranties, express or implied. We make no representations or warranties regarding the accuracy, completeness, or availability of the information.

We shall not be liable for any direct, indirect, special, or consequential damages arising from the use of information on this website.

Technical Information
  • All specifications, including torque values, fluid capacities, and maintenance procedures, should be verified against your vehicle's factory service manual.
  • Vehicle specifications and procedures may vary by model year, trim level, and region.
  • Always follow the manufacturer's recommended procedures and safety precautions.
  • Working on vehicles can be dangerous. Always take proper safety precautions and use appropriate safety equipment.
  • If you're unsure about any procedure, consult a qualified professional mechanic.
Intellectual Property
All content, including text, images, and specifications, is protected by copyright and other intellectual property laws. Any unauthorized use or reproduction is prohibited.

© 2025 Ferrari Specs. All rights reserved.

Privacy Policy Terms of Service